X-Grip

X-Grip® is appropriate for a wide variety of applications including driving, boating, cycling and performing. The spring loaded X-Grip® features expandable grip arms for quick insertion and release of your phone or tablet. For more intense environments, X-Grip® comes with a rubber tether that easily holds your device in place for added piece of mind.

Tough Claw™

The RAM® Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. And best of all, you can clamp it virtually anywhere! Whether you are mounting to a motorcycle handlebar, ATV roll bar, boat windshield, wheelchair, mic stand, tabletop edge or tripod leg, the RAM® Tough-Claw will become one of your most versatile and essential RAM® components in your collection.

Your rig. Your mount. Your way.

Customize your setup to fit your needs exactly or try one of our simple, premade solutions in-store.

Choose your base

What surface are you going to attach your device to? Do you need something fixed, easily relocated, or somewhere in between? Make sure the mount and ball are rated for the weight of your device.

Tough Claw

A durable and versatile option for almost any situation.

U-Bolt

A lightweight and low-profile option for mounting to bars and rails.

RAM Suction

A powerful suction cup for mounting to glass or smooth plastic surfaces.

E-Z Strap

An adjustable and durable zip-tie style base mount.

Torque Mount

A handlebar/rail mount with sizing inserts for a secure fit that prevents jiggle or slip.

Round Plate

A fixed-mounted solution with round plate for evenly distributed weight.

Grab an arm

How far from the base do you want your device to be? Do you need to bend around something? Would you benefit from a longer range of motion for your device?

Short Arm

1.75″ double socket arm, has a socket at both ends that accommodates B Size 1″ balls.

Medium Arm

3″ double socket arm, has a socket at both ends that accommodates B Size 1″ balls.

Long Arm

5.25″ double socket arm, has a socket at both ends that accommodates B Size 1″ balls.

Double Socket Swivel Arm

5.5″ open ball sockets with a 360° rotation point at the center and a connecting swivel joint that rotates forward and back 180°. The rubber ball and socket at either end, and a central pivot point provides unsurpassed adjustability.

Dual Extension Arm

Two standard-length double socket arms, connected by a double ball adapter. This arm provides the needed extension and articulation to set your device exactly where you want it.
Overall length: 8.375″

Single Swing Arm

A 6″ long swing arm mounted on a vertical surface mounting base with two pivoting points on the mount.

Select your top mount

How much does your device weigh? Do you need a bolt-on or spring-loaded grip? Make sure to check compatibility of ball/socket with your arm piece.

Round AMPs Plate

B Size 1″ diameter rubber ball connected to a flat 2.5″ diameter plate. This mount has pre-drilled holes, including the universal AMPs hole pattern.

Universal Electronics and Marine Plate

1.5″ diameter rubber ball connected to a flat 6.25 x 2″ rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.

Diamond Plate

B size 1″ diameter rubber ball on a 2.43″ x 1.31″ diamond plate. Matches the industry standard AMPS hole pattern and will connect to a large variety of RAM mounts and third party cradles, such as Garmin handhelds.

Universal X-Grip

A clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic.

Cradle Dimensions
Minimum Width = 1.875″ (Minimum Height = 4.25″)
Maximum Width = 3.25″ (Minimum Height = 2.25″)
Depth = 0.875″

Quick-Grip

The RAM Quick-Grip device mount is capable of holding a broad range of electronic devices. The spring loaded mechanism and the adjustable side keepers allow for a secure grip on your device.

Cradle Clamping Dimensions:
Height Range: 4.75″ – 5.25″
Width Range: 2.25″ – 3.25″

Device Cradle

Get the cradle that is designed to fit your device. These tailored device cradles will give a snug fit to your device. Used in conjunction with the diamond plate these cradles can attach to any RAM rig.